IR 5 Channel (4 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

IR Remote control is a combination of Infrared Transmitter and Receiver which contains 4 Relays and 1 TRiAC output which can be controlled wirelessly. This makes the unit very easy to operate and integrate with existing systems. The remote control operates the corresponding relay on the receiver board, i.e. (Light 1 operates relay 1), (Light 2 operates relay 2), etc. Relay contact can control any equipment in Latch Mode (Toggle on each key press). Each relay has indicator LED showing the ON/OFF status.

The Transmitter uses a Modulated 38 KHz carrier to transmit data about which button is pressed. This method is used in all IR remote controls as it offers a high degree of noise immunity against interfering light sources. At the Receiver end, the IR receiver module extracts the data signal from the carrier. This active HIGH output is used to operate a relay via optocoupler.


SPECIAL FEATURE - Memory backup EEPROM Saves the Last Condition of Relays so that when Power Fails and Resumes, all the settings will be retained.

 

Comes with Custom Built SLEEK REMOTE as shown in picture

Features:

  • 100% BRAND NEW and TESTED
  • 5 Device Control Output (4 Lights On/Off + 1 FAN Speed/Dimmer Control 10 Level).
  • Can be used directly to control 240V power appliances such as Lights, Fan, Projectors etc.
  • Each Relay can switch ON or OFF individually
  • Equipped with four 7A / 250AC Relays
  • Equipped with one 4A / 250AC Triac
  • Each Relay can control any equipment in Latch Mode (Toggle on each key press)
  • Relay contacts are brought out as Screw Terminals
  • Remote operating range up to visible distance (5-10 meters)
  • Master ON/OFF button can Turn ON / Turn OFF all relays and triac at once
  • Compact 3v Battery Operated Remote
  • Receiver Indicates output status by LED
  • Receiver operates from 230 Volt AC
  • Relay contacts are brought out as Screw Terminals
  • IR Sensor can be extended outside the switch board
  • High Quality Unbreakable PCB that can easily be mounted inside regular switchboard at home or office
  • Board Dimension: 14.3 x 9.3 CM

Applications:

  • Wireless Remote control of Lights and Fan at home or office
  • Wireless Remote control of Projectors and speaker system in multimedia
  • Security and burglar alarm systems
  • Control of motors and system in Robotics
  • Smoke and fire alarm systems
  • Garage door controllers
  • Car door controllers
  • Other remote control systems

Specifications:

Transmitter (Remote):

  • Operating Voltage 3.0V Battery
  • Range of Operation Approx 5-10 Meters


Receiver:

  • Operating Voltage 230V AC
  • Infrared Detector Frequency 38 kHz

Package Contents:

1 x IR 5 Channel (4 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

1 x Remote Control (same as shown in picture)

  

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

IR 5 CH (4 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation

  • Brands Robosoft Labs
  • Product Code: SKURL2011
  • Availability: In Stock
  • ₹1,499Rs
  • ₹839Rs


Related Products

2Pcs IR Obstacle Line Proximity Fire Color Sensor for Arduino Rasp Pi 8051 AVR

2Pcs IR Obstacle Line Proximity Fire Color Sensor for Arduino Rasp Pi 8051 AVR

2Pcs IR Obstacle Line Proximity Fire Color Sensor for Arduino Rasp Pi 8051 AVR  This is a mu..

₹99Rs ₹169Rs

2Pcs LDR Photosensitive Resistance Sensor Module for Arduino AVR Rasp Pi 8051

2Pcs LDR Photosensitive Resistance Sensor Module for Arduino AVR Rasp Pi 8051

2Pcs LDR Photosensitive Resistance Sensor Module for Arduino AVR Rasp Pi 8051 Module features: ..

₹119Rs ₹219Rs

Tags: IR 5 Channel (4 Lights +1 FAN Speed) Remote Control Based Wireless Home Automation