With this board you can develop and prototype any circuit with any of 8051/8052 (40 pin microcontrollers) i.e Atmel's AT89C51, AT89C52, AT89S51, AT89S52, AT89S53 and Phillips 89v51RD2 . The RS232 driver on board allows easy connection with PC or other embedded hardware . The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.

MAIN FEATURES:
 

• RS232 Tx, Rx interface with MAX232 IC on socket
• DIL40 ZIF Socket ( Zero Insertion Force) microcontroller socket - To Reduce Microcontroller Damages
• Quartz crystall 11.0592Mhz
• Reset button
• Power plug-in jack
• Extension slot on every uC pin
• GND bus
• Vcc bus.
• Four mounting holes 3,3 mm (0,13")

I/O Features

• ISP Programming Supported (Usbasp Programmer Supported)
• 89v51RD2 Flasher through RS232 using Flash magic Software
• On board Regulated Power Supply 5v,12v supplies
• Easy to test with Burg Connectors wires
• An RS232 Serial Port
• DC Power Supply Connector (12v Ac or Dc)
• 4 LED array
• 2 Interrupt Switches

8051/8052/AVR USBASP PROGRAMMER

Features

• Flash Burner for AVR Series from ATMEL and 8051/8052 Microcontrollers.
• Communication - USB
• Auto Erase before writing and Auto Verify after writing
• Freeware AVR GCC C Compiler
• ISP Programming Socket
• Connects through AVR DUDE
• USB Powered
• Device Support

AT89s51, AT89s52, AT89s53, AT89s8253

AT90S1200,2313,2323,2343,4414,4433,4434,8515,8535,
ATMEGA103,128,1280,1281,16,161,162,163,165,168,169,
ATMEGA 2560,2561,32,323,325,3250,329,3290,406,48,64
ATMEGA 640,644,645,6450,649,6490,8,8515,8535,88
ATTINY 11,12,13,15,22,2323,25,26,261,28,44,45,461,84,85,86
AT90CAN128,32,64 - AT90PWM2,3

Package Content

• 8051 / 8052 Development Board with AT89S52 , MAX232 IC and 8051/8052/AVR USBASP PROGRAMMER
• 8051/8052/AVR USBASP PROGRAMMER
• FREE USB CABLE
• FREE 6 Burg Cable Female 2 Female
• Programmer Driver (will be sent through Email)
• Programming Software For 8051 / 8052 . (will be sent through Email)